You are using a version of Internet Explorer (version 8 and / or older) or the compatibility mode, which does not support some functionalities of the site you're viewing. This page can be displayed correctly you therefore may not. In order to use the full functionality of the site is a current Internet Explorer or another browser (eg: Google Chrome, Firefox) necessary.
HomeServiceDownloadsSoftware > inoLab® Multi 9620 IDS, 9630 IDS

Software and Updates for inoLab® Multi 9620 IDS and 9630 IDS

Download the latest version of software for the digital IDS benchtop meters inoLab® Multi 9620 IDS and inoLab® Multi 9630 IDS 

Firmware Update – V2.18

Windows software download for firmware update of inoLab® Multi 9620 and 9630 via personal computer.

Because of continuous improvement of internal performance, we always recommend using the latest firmware version. 

Download and installation notes:

The cable for the serial USB interface is included in the delivery.

The connection of 800 or 500 Series ISE electrodes requires an ADA 94pH/IDS DIN (order no. 108131) respectively ADA 94pH/IDS BNC (order no. 108132) adapter.

Existing wireless modules (only IDS WLM-M) have to be updated (V2.00) before operation. Please find the corresponding firmware update below. 

Version history – innovations

  • V2.18:

    • Solving a problem when doing a continuous automatic printing with connected USB printer

  • V2.17:

    • Solves a problem when switching the meters on or off: If the meter does not turn on, first perform a reset: Please press simultaneously “Menu – Enter” and “On/Off”, this will boot the meter automatically (without losing data)! 

  • V2.16:

    • General optimizations

  • V2.15:

    • General optimizations

  • V2.14:

    • General optimizations

  • V2.13:

    • General optimizations and minor bug fixes

  • V2.12:

    • Optimized calibration for FDO® 925 
    • Extended resolution for FDO® 925  to 3 digits at  concentrations below 1 mg/l (accuracy at zero: ≤ 0,02 mg/l)

  • V2.11:

    • Newly designed F1 key for retrieving information
    • New printer driver for TE 202 of SEWO
    • Optimizations and bug fixes

  • V2.10:

    • Minor optimizations

  • V2.09:

    • Minor optimizations

  • V2.08:

    • Minor optimizations

  • V2.07:

    • Extend the selection list of wireless sensor up to 16 units

  • V2.06:

    • Simultaneous connection of wireless and tethered sensor (depending on available inputs) 

  • V2.05:

    • User-defined sensor description via MultiLab User (version 1.14)

  • V2.04:

    • Minor optimizations

  • V2.03:

    • Optimization of performance

  • V2.02:

    • Data storage problems solved

  • V2.01:

    • Possibility to implement user access levels via MultiLab® User 

  • V2.00:

    • Provides operation of IDS wireless modules in combination with IDS plug head sensors, simultaneous measurement of up to 2 (9620) or 3 (9630) sensors via radio transmission.

  • V1.02:

    • General performance updates
    • Bug fixes and optimization of sensor connection and recognition 
    • Optimization of USB printer output
    • Output of measured values as csv format when polling via USB interface (U.csv(n) n = 'h', 'H' , 0, 1, 2, 3)

  • V1.01: Detection and processing of VisoTurb® 900-P IDS

Download ZIP archive:

Update for wireless modules - V2.10

Update for IDS WLM-M meter modules for wireless measurement with IDS multi-channel instruments models MultiLine® Multi 3620 IDS/3630 IDS and inoLab® Multi 9620 IDS/9630 IDS

Download and installation notes:

Before installation please read the instruction manual.

System Requirements:

Microsoft Windows 2000, Windows Server 2003, Windows XP, Windows Vista or Windows 7

Download ZIP-Archiv:

MultiLab® User – V1.14

PC program for implementing an user administration with MultiLine® portables or inoLab® Multi IDS.

The terminal program  MultiLab® User has the possibility of defining up to 50 users or measuring sites  if desired including password protection. These inputs will be documented.

For following meters three different access levels can be defined: MultiLine Multi 3510 IDS (from V2.02), MultiLine® Multi 3620/3630 IDS (from V2.01), inoLab® Multi 9310 IDS (from V2.03), inoLab® Multi 9620/9630 IDS (from V2.01). This supports admitting or locking GLP/GMP relevant settings. 

New: User-defined description of IDS sensors: Connect an IDS Sensor (plug head sensors with  AS/IDS cable) to a Multi 3620/3630 IDS (starting with software version 2.06) or an inoLab® Multi 9620/9630 IDS (starting with version 2.05) and give it a new description. Up to 30 characters can be used. Highly recommended for wireless measurement without confusion! Reset to default values possible at any time.

For old instruments the current function remains (access control).

Download and installation notes:

Please note:

The necessary cable for connection to PC is included in the scope of delivery of the meter.

For proper operation of the USB interface a special driver is required.
For installation of this driver please read below.

System Requirements:

Microsoft Windows 2000, Windows Server 2003, Windows XP, Windows Vista or Windows 7

Version history – innovations

  • V1.14: User-defined description of IDS sensors, only via Multi3620/3620 IDS and inoLab® Multi 9620/9630 IDS
  • V1.13: Possibility to implement user access levels via MultiLab® User
  • V1.12: Optimizations
  • V1.11: Optimizations
  • V1.10: Optimizations
  • V1.09: Removed error during the input of an alternative password

Download ZIP archive:

MultiLab® Importer – V1.22

Additional program for the Excel file import of ProfiLine, MultiLine® and inoLab® meters.

The MultiLab® Importer is an Add-In for MS Excel®. It enables data import of measuring and memory values from portable models ProfiLine 3310, 3320, MultiLine® IDS and other IDS portable meters, inoLab® 7310, 7320 and inoLab® Multi IDS benchtop meters.

Download and installation notes:

Before installation please read the instruction manual.

System Requirements:

Microsoft Windows 2000, Windows Server 2003, Windows XP, Windows Vista or Windows 7


USB VCP driver (Virtual COM Port driver) – V 6.7.4

Driver to create a USB connection between the meters and a PC

Download and installation notes:

Administrator rights on the PC required:

  • Store the downloaded zip archive "USB_driver" into a directory of your choice
  • Decompress the zip archive into a directory of your choice
  • Depending on the operating system (32 or 64 bit), run the batch file "USB_VCD_driver_installer_32bit_system.bat“ or ”USB_VCD_driver_installer_64bit_system.bat“ by double click. 

After successful installation you will find a virtual COM port after the instrument has been connected

Download ZIP archive:

This may interest you:

Are you interested
in signing up for the free
WTW newsletter?

WTW Newsletter Registration

Any Question?
We advise
you gladly!

WTW Contact